Bookmarks

You are interested in the following products:

Isomergic acid SF is a very bright conjugated fatty acid with very good colour stability. It is suitable for alkyd and polyester resins, especially for vinylated and acrylated systems with which they can copolymerize according to the Diels-Alder mechanism.

Product name
ISOMERGINSÄURE SF
C 18: 2 conjugated
55 - 60 [%]
Acid value
198 - 202 [mg KOH/g]
Iodine value
130 - 150 [g I2/100 g]
Request product

Isomergic acid SY is a very bright conjugated fatty acid with very good colour stability. It is suitable for alkyd and polyester resins, especially for vinylated and acrylated systems with which they can copolymerise according to the Diels-Alder mechanism.

Product name
ISOMERGINSÄURE SY
C 18: 2 conjugated
50 - 55 [%]
Acid value
198 - 202 [mg KOH/g]
Iodine value
125 - 140 [g I2/100 g]
Request product

Merginamid A 112 is a modified polyaminoamide adduct containing solvents (xylene/ n-butanol) which, in combination with solutions of solid epoxy resins, leads to tack-free film formation even at high humidity and temperatures of around ten degrees Celsius.

Product name
MERGINAMID A 112
Amine value
130-145 [mg KOH/g]
Function
Corrosion protection, LH-containing paints, non-tacky films even at 80% relative humidity
H-active equivalent
520 [g/Eq]
Viskosität
1.400 - 2.200 at 20 °C [mPa*s]
Request product

Merginamid A 130 is a modified polyaminoamide adduct containing solvents (xylene/n-butanol) which, in combination with solutions of solid epoxy resins, leads to tack-free film formation even at high humidity and temperatures of around ten degrees Celsius. It is the accelerated version of the A 112.

Product name
MERGINAMID A 130
Amine value
145 - 165 [mg KOH/g]
Function
Corrosion protection, as with A 112, but also at temperatures around 5°C
H-active equivalent
520 [g/Eq]
Viskosität
1.400 - 2.200 at 20 °C [mPa*s]
Request product

Merginamid A 140 is a solvent-containing (xylene/ ; N-butanol) polyaminoamide adduct hardener which, in combination with solutions of solid epoxy resins with an epoxy equivalent weight of approx. 475, is suitable for the formulation of cold-curing solvent-containing coatings for use in corrosion protection on steel (e. g. in shipbuilding) and mineral substrates (e. g. in construction).

Product name
MERGINAMID A 140
Amine value
140-160 [mg KOH/g]
Function
Corrosion protection, shipbuilding, mineral substrates
H-active equivalent
340 [g/Eq]
Viskosität
7.000 - 9.000 at 25 °C [mPa*s]
Request product

Merginamid A 154 is a solvent-free, modified polyaminoamide adduct dissolved in water. It has the ability to emulsify liquid epoxy resins and epoxy solid resin dispersions in water and to cure perfectly after evaporation of the water into a homogeneous film. Epoxy resin coatings based on this aqueous hardener have excellent adhesion to mineral substrates, metals and plastics after curing.

Product name
MERGINAMID A 154
Viscosity
18.000 - 30.000 at 25 °C [mPa*s]
Amine value
105 - 125 [mg KOH/g]
Function
Corrosion protection, surface treatment
H-active equivalent
260 [g/Eq]
Solid content
39-41 [%]
Request product

Merginamid A 155/2 is a solvent-free, modified polyaminoamide adduct dissolved in water. It has the ability to emulsify liquid epoxy resins and epoxy solid resin dispersions in water and to cure perfectly after evaporation of the water into a homogeneous film. Epoxy resin coatings based on this aqueous hardener have excellent adhesion to mineral substrates, metals and plastics after curing.

Product name
MERGINAMID A 155/2
Viscosity
13.000 - 23.000 at 25 °C [mPa*s]
Amine value
155 - 175 [mg KOH/g]
Function
Corrosion protection, surface treatment
H-active equivalent
210 [g/Eq]
Solid content
49 - 51 [%]
Request product

Merginamid A 160 is a water-soluble, solvent-free, modified polyaminoamide adduct which has the ability to emulsify liquid epoxy resins and epoxy solid resin dispersions in water and to cure perfectly after evaporation of the water into a homogeneous film. Epoxy resin coatings based on this aqueous hardener have excellent adhesion to mineral substrates, metals and plastics after curing.

Product name
MERGINAMID A 160
Viscosity
30.000 - 50.000 at 25 °C [mPa*s]
Amine value
135 - 155 [mg KOH/g]
Function
Corrosion protection, surface treatment
H-active equivalent
210 [g/Eq]
Solid content
49 - 51 [%]
Request product

Merginamid A 210/5 is a water-soluble, solvent-free, modified polyamine adduct which has the ability to emulsify modified and unmodified liquid epoxy resins and epoxy solid resin dispersions in water and to cure perfectly after evaporation of the water into a homogeneous film. Epoxy resin coatings based on this aqueous hardener have excellent adhesion to mineral substrates, metals and plastics after curing.

Product name
MERGINAMID A 210/5
Viscosity
18.000 - 28.000 at 25 °C [mPa*s]
Amine value
170 - 200 [mg KOH/g]
Function
Corrosion protection, surface treatment
H-active equivalent
230 [g/Eq]
Solid content
54 - 56 [%]
Request product

Merginamid A260 is the accelerated version of Merginamid A 280.

Product name
MERGINAMID A 260
Viscosity
8.000 - 12.000 at 40 °C [mPa*s]
Amine value
265 - 295 [mg KOH/g]
Function
corrosion protection, surface treatment, wet concrete
H-active equivalent
170 [g/Eq]
Solid content
100 [%]
Request product

Merginamid A 280 is a low-viscosity, solvent-free polyaminoamide adduct. In combination with liquid EP resins particularly suitable for coatings on difficult concrete substrates, for concrete bonding and for the formulation of solvent-free or low-solvent paints (high-solid paints) for corrosion protection.

Product name
MERGINAMID A 280
Viscosity
1.000 - 2.000 at 25 °C [mPa*s]
Amine value
250 - 290 [mg KOH/g]
Function
corrosion protection, surface treatment, wet concrete
H-active equivalent
115 [g/Eq]
Solid content
100 [%]
Request product

Merginamid L 190/70 is a reactive polyaminoamide resin obtained by condensation of fatty acids or fatty acid esters with polyamines. It's dissolved in xylene.

Product name
MERGINAMID L 190/70
Viscosity
440 - 1.250 at 25 °C [mPa*s]
Amine value
155 - 185 [mg KOH/g]
Function
Corrosion protection, direct to metal, surface protection of wood, concrete and plastics, adhesives. High chemical resistance, very good adhesion.
H-active equivalent
340 [g/Eq]
Solid content
69 - 71 [%]
Request product

Merginamid L 195/70 is like 190/70 a reactive polyaminoamide resin dissolved in xylene, which is obtained by condensation of fatty acids or fatty acid esters with polyamines. It's dissolved in xylene. It has a higher degree of cross-linking than L190/70 and therefore a higher viscosity.

Product name
MERGINAMID L 195/70
Viscosity
900 - 1.600 at 25 °C [mPa*s]
Amine value
160 - 185 [mg KOH/g]
Function
Corrosion protection, direct to metal, surface protection of wood, concrete and plastics, adhesives. High chemical resistance, very good adhesion. Better salt spray results than L190/70.
H-active equivalent
340 [g/Eq]
Solid content
69 - 71 [%]
Request product

Merginamid L 390 is a very low viscosity solvent-free polyaminoimidazoline, which is obtained by condensation of fatty acids or fatty acid esters with polyamines. The formation of annular imidazoline structures results in a lower viscosity and slower reactivity than with polyaminoamides.

Product name
MERGINAMID L 390
Viscosity
100 - 400 at 25 °C [mPa*s]
Amine value
370 - 410 [mg KOH/g]
Function
Use in mortars, casting resins and moulding materials, particularly long processing time, very good mechanical properties, improved wetting and adhesion compared to polyaminoamides
H-active equivalent
95 [g/Eq]
Solid content
100 [%]
Request product

Merginamid L 445 is a medium viscous solvent-free polyaminoimidazoline.

Product name
MERGINAMID L 445
Viscosity
1.000 - 3.000 at 40 °C [mPa*s]
Amine value
370 - 410 [mg KOH/g]
Function
Corrosion protection, marine paints, coatings, fillers, mortars and reactive adhesives. Long working time, very good adhesion.
H-active equivalent
95 [g/Eq]
Solid content
100 [%]
Request product

Merginat ELO is an oleochemical epoxy compound based on linseed oil, with a very high epoxy oxygen content compared to commercial epoxy softeners.

Product name
MERGINAT ELO
Description
Linseed oil, epoxidised CAS number: 8016-11-3 EG number: 232-401-3
Mittlere Viskosität
700 - 1.300 at 25 °C [mPa*s]
Function
plasticiser, stabiliser, hydrolysis protection
Epoxy oxygen
8,5 - 9,5 [%]
Acid value
0 - 1,0 [mg KOH/g]
Request product

Merginat EPE is a low viscosity, epoxidised vegetable oil ester.

Product name
MERGINAT EPE
Description
Fatty acids, C14-22, 2-ethylhexyl ester, epoxidised. CAS number: 95370-96-0EG number: 305-962-8
Mittlere Viskosität
max. 80 at 25 °C [mPa*s]
Function
plasticiser, lubricant additive
Epoxy oxygen
3,5 - 4,5 [%]
Acid value
max. 1 [mg KOH/g]
Request product

Merginat ESBO is an epoxidised vegetable oil based on soy. It is used as a plasticiser and co-stabiliser in materials based on PVC.

Product name
MERGINAT ESBO
Description
Soybean oil, epoxidised, ethylene glycol etherCAS number: 8013-07-8 EG number: 232-391-0
Mittlere Viskosität
400 - 600 at 20 °C [mPa*s]
Function
plasticiser, stabiliser
Epoxy oxygen
6,5 - 7,5 [%]
Acid value
max. 0,5 [mg KOH/g]
Request product

Merginat UV 8107 is a radiation-curable binder based on vegetable oil. It has a very high proportion of renewable raw materials and contains no solvents.

Product name
MERGINAT UV 8107
Viscosity
800 - 1.300 at 25 °C [mPa*s]
Function
1K-Coating; Varnish binder with very good chemical resistance, low shrinkage, good flexibility, good firmness
Acid value
max. 1 [mg KOH/g]
Request product

Merginat UV T is a radiation-curable and solvent-free binder based on vegetable oil, modified with a reactive diluent.

Product name
MERGINAT UV T
Viscosity
150 - 300 at 25 °C [mPa*s]
Function
lower viscosity, higher reactivity
Acid value
max. 1 [mg KOH/g]
Request product

Merginol 207 is a NOP with primary and secondary hydroxyl groups and has a high proportion of renewable raw materials.

Product name
MERGINOL 207
Viscosity
2.500 - 4.500 at 25 °C [mPa*s]
Hydroxyl number / hydroxyl content
65 - 90 [mg KOH /g] / 2,4 [%]
Average functionality
3,1
Function
Base polyol, hydrophobicity, gloss enhancement, hydrolysis resistance, chemical resistance
Description
Soybean oil, epoxidised, ethylene glycol etherCAS number: 85586-34-1 EG number: 287-836-1
Water content
max. 0,1 [%]
Request product

Merginol 208 is a NOP with primary and secondary hydroxyl groups and has a high proportion of renewable raw materials.

Product name
MERGINOL 208
Viscosity
500 - 1500 at 25 °C [mPa*s]
Hydroxyl number / hydroxyl content
40 - 60 [mg KOH/g] / 1,5 [%]
Average functionality
1,2
Function
Additive polyol, hydrophobicity, gloss enhancement, viscosity regulation
Description
Soybean oil, epoxidised, ethylene glycol etherCAS number: 85586-34-1 EG number: 287-836-1
Water content
max. 0,1 [%]
Request product

Merginol 240 is a NOP with primary and secondary hydroxyl groups and has a high proportion of renewable raw materials.

Product name
MERGINOL 240
Viscosity
1.500 - 2.500 at 25 °C [mPa*s]:
Hydroxyl number / hydroxyl content
150 - 180 [mg KOH/g] / 5,1 [%]
Average functionality
5,1
Function
Function basic and additive polyol , wear resistance, chemical resistance
Description
Soybean oil, epoxidised, ethylene glycol etherCAS number: 85586-34-1 EG number: 287-836-1
Water content
max. 0,1 [%]
Request product

Merginol 901 is a branched NOP with primary and secondary hydroxyl groups and has a high proportion of renewable raw materials.

Product name
MERGINOL 901
Viscosity
700 - 1.200 at 25 °C [mPa*s]
Hydroxyl number / hydroxyl content
290 - 330 [mg KOH/g] / 9,1 [%]
Average functionality
3,0
Function
Basic and additive polyol, hydrophobicity, hardness, high Tg, UV stability, light colour
Description
Fatty acids, C16-18 and C18  unsaturedt, epoxidised, methyl ester, reaction products with trimethylolpropaneCAS number: 188831-96-1 EG number: 606-155-6
Water content
max. 0,15 [%]
Request product

Merginol 903 is a NOP with primary and secondary hydroxyl groups and has a very high proportion of renewable raw materials.

Product name
MERGINOL 903
Viscosity
80 - 300 at 25 °C [mPa*s]
Hydroxyl number / hydroxyl content
220 - 260 / 7,0 [mg KOH/g] / Hydroxyl content [%]:
Average functionality
2,1
Function
Basic and additive polyol, hydrophobicity, hydrolysis resistance, chemical resistance, elasticity/flexibility, viscosity regulation, gel time extension, UV stability
Description
Fatty acids, C16-18 und C18 unsaturedt, epoxidised, methylester, reaction products with ethylene glycolCAS number: 211450-54-3 EG number: 606-712-3
Water content
max. 0,1 [%]
Request product

Merginol 908 is a branched NOP with primary and secondary hydroxyl groups and has a high proportion of renewable raw materials.

Product name
MERGINOL 908
Viscosity
1.100 - 1.800 at 25 °C [mPa·s]
Hydroxyl number / hydroxyl content
190 - 215 / 6,4 [mg KOH/g] / Hydroxyl content [%]
Average functionality
3,4
Function
base polyol, hydrophobicity, hydrolysis resistance, chemical resistance, crack bridging, pigment wetting
Description
Polyol mixture
Water content
max. 0,2 [%]
Request product
This website uses cookies to allow you to surf pleasantly.