Epoxy hardeneradduct hardener, solvent-based

Merginamid A 112 is a modified polyaminoamide adduct containing solvents (xylene/ n-butanol) which, in combination with solutions of solid epoxy resins, leads to tack-free film formation even at high humidity and temperatures of around ten degrees Celsius.

Product name
MERGINAMID A 112
Amine value
130-145 [mg KOH/g]
Function
Corrosion protection, LH-containing paints, non-tacky films even at 80% relative humidity
H-active equivalent
520 [g/Eq]
Viskosität
1.400 - 2.200 at 20 °C [mPa*s]
Request product

Merginamid A 130 is a modified polyaminoamide adduct containing solvents (xylene/n-butanol) which, in combination with solutions of solid epoxy resins, leads to tack-free film formation even at high humidity and temperatures of around ten degrees Celsius. It is the accelerated version of the A 112.

Product name
MERGINAMID A 130
Amine value
145 - 165 [mg KOH/g]
Function
Corrosion protection, as with A 112, but also at temperatures around 5°C
H-active equivalent
520 [g/Eq]
Viskosität
1.400 - 2.200 at 20 °C [mPa*s]
Request product

Merginamid A 140 is a solvent-containing (xylene/ ; N-butanol) polyaminoamide adduct hardener which, in combination with solutions of solid epoxy resins with an epoxy equivalent weight of approx. 475, is suitable for the formulation of cold-curing solvent-containing coatings for use in corrosion protection on steel (e. g. in shipbuilding) and mineral substrates (e. g. in construction).

Product name
MERGINAMID A 140
Amine value
140-160 [mg KOH/g]
Function
Corrosion protection, shipbuilding, mineral substrates
H-active equivalent
340 [g/Eq]
Viskosität
7.000 - 9.000 at 25 °C [mPa*s]
Request product
This website uses cookies to allow you to surf pleasantly.