Showing 13–24 of 27 results
| Product name | MERGINAMID L 195/70 |
|---|---|
| Viscosity | 900 – 1.600 mPa*s bei 25 °C |
| Amine value | 160 – 185 mg KOH/g |
| Function | Corrosion protection, direct to metal, surface protection of wood, concrete and plastics, adhesives. Highly resistant to chemicals, very good adhesion. Better salt spray results than L190 / 70. |
| H-active equivalent | 340 g/Eq |
| Solid content | 69 – 71 % |
| Product name | MERGINAMID L 390 |
|---|---|
| Viscosity | 100 – 400 mPa*s at 25 °C |
| Amine value | 370 – 410 mg KOH/g |
| Function | Use in mortars, casting resins and molding materials, particularly long processing time, very good mechanical properties, improved wetting and adhesion compared to polyaminoamides |
| H-active equivalent | 95 g/Eq |
| Solid content | 100 % |
| Biobased carbon content | 75 % |
| Product name | MERGINAMID L 445 |
|---|---|
| Viscosity | 1.000 – 3.000 mPa*s at 40 °C |
| Amine value | 370 – 410 mg KOH/g |
| Function | Corrosion protection, marine paints, coatings, fillers, mortars and reactive adhesives. Long processing time, very good adhesion. |
| H-active equivalent | 95 g/Eq |
| Solid content | 100 % |
| Biobased carbon content | 75 % |
| Product name | MERGINAT ELO |
|---|---|
| Description | Linseed oil, epoxidised CAS number: 8016-11-3 EG number: 232-401-3 |
| Average viscosity | 700 – 1,300 mPa * s at 25 ° C |
| Function | Plasticiser, stabiliser, hydrolysis protection |
| Epoxy oxygen | 8.5 – 9.5 % |
| Acid Number | 0 – 1.0 mg KOH / g |
| Biobased carbon content | 100 % |
| Product name | MERGINATE EPE |
|---|---|
| Description | Fatty acids, C14-22, 2-ethylhexyl ester, epoxidised. CAS number: 95370-96-0EG number: 305-962-8 |
| Average viscosity | Max. 80 mPa * s at 25 ° C |
| Function | plasticiser, lubricant additive |
| Epoxy oxygen | 3.5 – 4.5 % |
| Acid value | max. 1 mg KOH / g |
| Biobased carbon content | 69 % |
| Product name | MERGINAT ESBO |
|---|---|
| Description | Soya-bean oil, epoxidised CAS number: 8013-07-8 EG number: 232-391-0 |
| Average viscosity | 400 – 600 mPa*s at 20 ° C |
| Function | plasticiser, stabiliser |
| Epoxidsauerstoff | 6.5 – 7.5 % |
| Acid number | max. 0.5 mg KOH / g |
| Biobased carbon content | 100 % |
| product name | MERGINAT UV 8107 |
|---|---|
| Viscosity | 700 – 1.300 mPa*s at 25 °C |
| Function | Binder for radiation-curable coatings, varnishes, adhesives and printing inks |
| Acid number | max. 1 mg KOH/g |
| Biobased carbon content | 98 % |
| Product name | MERGINAT UV T |
|---|---|
| Viscosity | 150 – 300 mPa*s at 25 °C |
| Function | lower viscosity, higher reactivity |
| Acid number | max. 1 mg KOH/g |
| Biobased carbon content | 71 % |
| Product name | MERGINOL 207 |
|---|---|
| Viscosity | 2.500 – 4.500 mPa*s at 25 °C |
| Hydroxyl number / hydroxyl content | 65 – 90 mg KOH /g / 2,4 % |
| Average functionality | 3,1 |
| Function | Base polyol, hydrophobicity, gloss enhancement, hydrolysis resistance, chemical resistance |
| Description | Soybean oil, epoxidised, ethylene glycol ether CAS number: 85586-34-1 EG number: 287-836-1 |
| Water content | max. 0,1 % |
| Biobased carbon content | 98 % |
| Product name | MERGINOL 208 |
|---|---|
| Viscosity | 500 – 1500 mPa*s at 25 °C |
| Hydroxyl number / hydroxyl content | 40 – 60 mg KOH/g / 1,5 % |
| Average functionality | 1,2 |
| Function | Additive polyol, hydrophobicity, gloss enhancement, viscosity regulation |
| Description | Soybean oil, epoxidised, ethylene glycol ether CAS number: 85586-34-1 EG number: 287-836-1 |
| Water content | max. 0,1 % |
| Biobased carbon content | 99 % |
| Product name | MERGINOL 240 |
|---|---|
| Viscosity | 1.500 – 2.500 mPa*s at 25 °C |
| Hydroxyl number / hydroxyl content | 150 – 180 mg KOH/g / 5,1 % |
| Average functionality | 5,1 |
| Function | Basic and additive polyol , wear resistance, chemical resistance |
| Description | Soybean oil, epoxidised, ethylene glycol ether CAS number: 85586-34-1 EG number: 287-836-1 |
| Water content | max. 0,1 % |
| Biobased carbon content | 94 % |
| Product name | MERGINOL 901 |
|---|---|
| Viscosity | 700 – 1.200 mPa*s at 25 °C |
| Hydroxyl number / hydroxyl content | 290 – 330 mg KOH/g / 9,1 % |
| Average functionality | 3,0 |
| Function | Basic and additive polyol, hydrophobicity, hardness, high Tg, UV stability, light colour |
| Description | Fatty acids, C16-18 and C18 unsaturedt, epoxidised, methyl ester, reaction products with trimethylolpropane CAS number: 188831-96-1 EG number: 606-155-6 |
| Water content | max. 0,15 % |
| Biobased carbon content | 80 % |
